The 40th DAE Safety & Occupational Health Professional Meet (DAE-SOHPM) will be conducted this year at Raja Ramanna Centre for Advanced Technology (RRCAT), Indore from October 17-19, 2024. The Meet is being jointly organized by RRCAT & AERB.
About Theme:
Industrial Safety -
"Safety management system to achieve zero harm"
Occupational Health - "Environmental factors and their impact on occupational health."
Theme:
Industrial Safety -
"Safety management system to achieve zero harm"
Occupational Health - "Environmental factors and their impact on occupational health."
Patrons
1.
Sh. Dinesh Kumar Shukla
Chairman, AERB
2.
Sh. Vivek Bhasin
Director, BARC
Steering Committee
1.
Sh. Unmesh D. Malshe, Director, RRCAT
Chairman
2.
Sh. S B Chafle, Executive Director, AERB
Co-chairman
3.
Dr. Komal Kapoor, Chief Executive , NFC
Member
4.
Dr. Santosh Kumar Satpati, Chairman & Managing Director, UCIL
As a part of the meet following safety competitions on the theme of the meet are being conducted for the employees of all DAE units & students of AECS RRCAT Indore units to have maximum participation and involvement.
Logo should be created base on the theme. A4 size i.e. 210 mm x 297 mm in portrait form, chart paper, colored poster, pencil sketch.
(Note: If any Logo is selected finally for the Meet, Technical Program Committee may slightly modify the Logo to suit the theme if required)
A2 size i.e 420 mm x 594 mm in portrait form, chart paper, colored poster, or pencil sketch.
Maximum 20 words (Hindi/English)
(slogan should be a phrase or combination of rhyming words on the theme).
Maximum A3 size i.e 297 mm x 420 mm
Theme
(A) Industrial Safety :
“Safety management system to achieve zero harm” “शून्य हानि का लक्ष्य प्राप्त करने के लिए संरक्षा प्रबंधन प्रणाली”
(B) Occupational Health : “Environmental factors and their impact on occupational health” “पर्यावरण कारक और व्यावसायिक स्वास्थ्य पर उनका प्रभाव”
Note:
Prizes will be awarded to three best entries.
Consolation prizes may also be awarded for each category depending upon the quality of entries received.
All DAE units are requested to submit their entries through the Head of the unit or through their authorized representative.
Entries should be sent by email to daesohpm(at)aerb.gov.in
All the entries should be submitted in PDF format (600-1200 dpi) JPEG/PNG.
Approved hard copies may please for sent to
Shri Diptendu Das.
RECEIPT OF ENTRIES HAS BEEN CLOSED ON 06 September 2024
Inviting contributory papers for 40th DAE
Safety & Occupational Health Professionals Meet (DAE-SOHPM), 2024
The 40th DAE Safety & Occupational Health Professionals
Meet will be held during October 17 - 19, 2024 at Raja Ramanna Centre for
Advanced Technology (RRCAT), Indore. Themes for this year's Meet are "Safety
Management System to achieve Zero harm" corresponding to industrial
safety aspects while "Environmental Factors and their impact on
Occupational Health" corresponding to occupational health aspects. In
these annual Meets, plenary sessions are being conducted in which selected
contributory papers are presented by the authors from various DAE units. In
continuation to this, contributory papers based on following topics are
hereby invited from DAE units, for this year's meet.
Sub Topics
Safe Industrial Culture - An Ongoing Process for achieving zero harm
Implementation of zero harm strategy in workplace
Emergency systems -A Key to Industrial Safety in Advanced Technological Applications
Risk Mitigation & Management Techniques in Industrial Safety to achieve zero harm
Overall approach towards Zero Harm in High Power & High Energy Ion sources
Challenges and strategies for promoting safety in work places
Techniques and Process Safety Management and case studies.
HAZOP studies in a process plant: An effective tool for achieving zero harm.
Safety in evolving & advanced Technological applications
Fire Hazard analysis & safety audits in a typical Production unit.
Key emergency systems : reliability and its importance
Safety hazards in relation to High energy accelerators
Safety aspects in Core technologies of High energy accelerators
Major statutory industrial safety code/norms/obligations/rule and regulations
Feedback of operational experience and its utilization for enhancement in industrial safety
Case studies - effective management of operational experience towards enhanced industrial safety
Sub Topics
Climate Change: Impact on Occupational Health
Ill effects of Pollution: Case studies on Occupational health of workers.
Medical management during employment - Medical examinations & fitness
Long term Occupational exposure to lasers & its limits.
Ergonomics at workplace
Challenges in occupational medical examinations
Occupational health safety in laser and accelerator operation and case studies
Standard operating Procedure (SOP) on conducting Annual medical examination at different site (for generating Occupational health data.)
The technical and occupational health staff of your unit can submit
soft copies of full text of the contributory papers after registration and nomination on the below portal -
The papers should be written in the format enclosed herewith.
This year it has been decided to upload the contributory papers on the
web page dedicated for this year's Meet on RRCAT web site. The web page will
be active for a month from the last date of the Meet. For More details please
visit RRCAT website.
It is requested to give wide publicity to this invitation in your unit
and encourage personnel for participation. It is requested to send the soft
copies of full text of the papers by email on or before August 30, 2024.
Important Dates
Competitions (Logo, Poster, Slogan & Cartoon):
Last date for receipt of entries: September 06, 2024 Competitions are now closed.
Contributory Papers:
Last date of submission : September 07, 2024September 11, 2024September 13, 2024
Contributory Paper submission is now closed.
Nominations:
Nominations should be sent before: September 07, 2024September 13, 2024September 20, 2024
Nomination submission is now closed.
Contact Us :
Prateek Bhatnagar
Member Secretary, 40th DAE SOHPM 2024,
Raja Ramanna Centre for Advanced Technology,
PO: CAT, Indore (MP)
Pin- 452013
Email: sohpmms(at)rrcat.gov.in,
prateek(at)rrcat.gov.in
Telephone: 0731-2488079
Mob- 9300112818
Click Here !!! for nomination and paper submission on DAE-SOHPM40 Portal.
Nominations are invited from all DAE units and aided institutions. All Unit heads are requested to nominate at least three participants comprising of one person (with some experience) from safety organization of the unit, one person from occupational health organization of the unit and one person from O&M/ construction staff, for the Meet. DAE Safety and Health Professionals must avail this unique opportunity for information sharing and thereby ensure improvement in Industrial Safety and Occupational Health scenarios in the DAE installations and make this meet a grand success to achieve the goal.
(Optional for bigger DAE Units:- units may send more number of nominations as deemed appropriate)
Note:
प्रतिभागियों हवाई अड्डे /रेल्वेस्टेशन बस स्टेशन और होटल/गेस्ट हाउस आदि के बिल यात्रा की व्यवस्था स्वय करने पड़ेगी मीट के दौरान प्रतिभागियों के लिए होटल (वेबसाइट पर सूचीबद्ध) से आयोजन स्थल तक और वापस आयोजन स्थल तक परिवहन की व्यवस्था की जाएगी | The delegates shall make their own arrangements for travel between airport/railway station/bus station and hotels/guest houses etc. Pooled transport will be arranged for the delegates from hotels (listed in the website) to venue and vice versa during the Meet.
06 सितम्बर 202413 सितम्बर 2024 20 सितम्बर 2024 के पूर्व जमा करे | To be submitted on or before 06 September 202413 September 2024 20 September 2024
Nomination submission is now closed.
List of Invited Speakers, Session Chairs and Outstation Participants Details
List of Delegates from RRCAT Details
List of Local Organizing Team Members Details
Accommodation Details
Transport Details
About RRCAT
RRCAT was established by the Department of Atomic Energy, India to expand the activities carried out at Bhabha Atomic Research Centre (BARC), Mumbai, in two frontline areas of science and technology namely Lasers and Accelerators. On February 19, 1984 the President of India, Gyani Zail Singh, laid the foundation stone of the centre.
Originally called the Centre for Advanced Technology, it was renamed by the Indian Prime Minister in December 2005 as Raja Ramanna Centre for Advanced Technology.
The Centre has indigenously designed, developed, and commissioned two synchrotron radiation sources: Indus-1 and Indus-2, serving as a national facility. Indus-1 is a 450 MeV, 100 mA electron storage ring emitting radiation from mid-IR to soft x-ray with a critical wavelength of ~61 Å. Indus-2 is a 2.5 GeV electron storage ring designed for the production of x-rays. Synchrotron radiation emitted from its bending magnets has broad spectrum covering soft and hard x-ray regions with a critical wavelength of ~2 Å. With its circumference of 172.5 m, and beam energy of 2.5 GeV, Indus-2 is presently the largest and the highest energy particle accelerator in the country.
The Centre is also involved in development of a variety of laser systems and their utilization for applications in industry, medicine and research. The laser systems developed include high power CO2 lasers, flash lamp and diode laser pumped Nd lasers, semiconductor lasers, chemical lasers, excimer lasers and high energy/intensity pulsed lasers.
The centre is situated at the south-western end of the Indore, Madhya Pradesh. It is about 11km from both the Indore Railway Station as well as Indore Airport.The RRCAT campus is spread over a 760 hectare picturesque site on the outskirts of Indore city. airport.
Around Indore
The city of Indore presents a happy blend of historical past & promises of rapid future modernization, it is situated on the Malwa plateau at an altitude of 535 m (18823 ft) above sea level, on the banks of two small rivulets-the Saraswati and the Khan. The name Indore is due to this deity. It is the largest city in Madhya Pradesh; this city has emerged as the commercial capital of the state. Situated on one of India’s oldest pilgrimage routes from Mahakaal at Ujjain on river shipra to Omkareshwar on the river Narmada and onwards to Rameshwaram, Indore was on the route of Marathas of Deccan on their way to North India. It is consistently ranked as the cleanest city in India.
To be updated soon
About Logo
The logo designed for the DAE Safety and Occupational Health Professional Meet (DAE-SOHPM) 2024 embodies a thoughtful blend of symbolism and functionality.
At its core, a shield symbolizes protection and safety, reflecting the event's commitment to occupational health. Within the shield, key icons are strategically placed: an icon having caring hand is shown at the center of shield stands for commitment to well-being of every personnel at DAE (colour of this icon is of same as DAE logo colour) also a helmet at the top left signifies industrial safety, while a heart with a lifeline at the top right underscores care and well-being. Abstract Lines radiate from the shield, representing the event's host, RRCAT, Indore renowned for its pioneering work in laser as well as beam-lines-based line emitting tangentially shows accelerator-based work.
The colour palette of the logo is carefully chosen to convey meaning: a green circle signifies trust, health, and safety, reflecting the core values of occupational health practices and the accents of red circles symbolize alertness and caution.
Industrial safety
"Industrial Safety Management System to achieve Zero Harm"
“शून्य हानि का लक्ष्य प्राप्त करने के लिए संरक्षा प्रबंधन प्रणाली”
A zero harm safety management system aims for protecting the workers & employees from various occupational hazards by effectively implementing safety management practices such as introducing robust safety policies, Advanced Safety monitoring tools & equipment’s , regular safety audits & inspections thereby providing a completely safe environment for workers & employees.
Zero Harm Implementation plan of an Organization starts from the Proactive management & its commitment towards fulfillment of effective Role & responsibilities. The identification of potential occupational Hazards and their effective control are inbuilt in the Employee and workers training program. The Root cause analysis, Mock drill training are regularly undertaken as per the strict compliances as mandated by the compliant authorities.
Dr. S. S. Ramaswamy Memorial Endowment Lecture on the theme of this Meet will be delivered by an eminent speaker.
Invited talks will be delivered by experts & contributory papers will be presented from delegates related to the Theme of the Meet i.e. Industrial Safety Management System to achieve Zero Harm & Environmental Factors and their impact on occupational Health
An exhibition of products by the suppliers and manufacturers of the personal protective equipment (PPE), safety appliances and medical services is also planned.
Few Presentations are also planned by reputed & leading contractors and exhibitors in Field of Safety & Occupational health diplaying their latest advanced products
Occupational Health
"Environmental Factors and their impact on occupational Health"
“पर्यावरण कारक और व्यावसायिक स्वास्थ्य पर उनका प्रभाव”
Environmental factors such as air pollution, climate change & natural disasters have profound impact on occupational health of workers & employees. Environmental pollutants can cause health problems like respiratory diseases, heart disease, and some types of cancer. Identifying, mapping and controlling physical factors, such as heat, noise and vibration, and chemical and biological risk factors at the workplace is called occupational hygiene. Occupational hygiene is assessed during workplace visits, with measurements and during health checks.
Dr. S. S. Ramaswamy Memorial Endowment Lecture on the theme of this Meet will be delivered by an eminent speaker.
Invited talks will be delivered by experts & contributory papers will be presented from delegates related to the Theme of the Meet i.e. Industrial Safety Management System to achieve Zero Harm & Environmental Factors and their impact on occupational Health
An exhibition of products by the suppliers and manufacturers of the personal protective equipment (PPE), safety appliances and medical services is also planned.
Few Presentations are also planned by reputed & leading contractors and exhibitors in Field of Safety & Occupational health diplaying their latest advanced products
About DAE-SOHPM-2024
The 40th DAE Safety & Occupational Health Professional Meet (DAE-SOHPM) will be conducted this year at Raja Ramanna Centre for Advanced Technology (RRCAT), Indore from October 17-19, 2024. The Meet is being jointly organized by RRCAT & AERB.
(A) Theme for Industrial safety : "Safety Management System to achieve Zero Harm"
A zero harm safety management system aims for protecting the workers & employees from various occupational hazards by effectively implementing safety management practices such as introducing robust safety policies, Advanced Safety monitoring tools & equipment’s , regular safety audits & inspections thereby providing a completely safe environment for workers & employees.
Zero Harm Implementation plan of an Organization starts from the Proactive management & its commitment towards fulfillment of effective Role & responsibilities. The identification of potential occupational Hazards and their effective control are inbuilt in the Employee and workers training program. The Root cause analysis, Mock drill training are regularly undertaken as per the strict compliances as mandated by the compliant authorities.
(B) Theme for Occupational Health : "Environmental Factors and their impact on occupational Health"
Environmental factors such as air pollution, climate change & natural disasters have profound impact on occupational health of workers & employees. Environmental pollutants can cause health problems like respiratory diseases, heart disease, and some types of cancer. Identifying, mapping and controlling physical factors, such as heat, noise and vibration, and chemical and biological risk factors at the workplace is called occupational hygiene. Occupational hygiene is assessed during workplace visits, with measurements and during health checks.
Dr.S.S.Ramaswamy Memorial Endowment Lecture on the theme of this Meet will be delivered by an eminent speaker.
Invited talks will be delivered by experts & contributory papers will be presented from delegates related to the Theme of the Meet i.e. Industrial Safety Management System to achieve Zero Harm & Environmental Factors and their impact on occupational Health
An exhibition of products by the suppliers and manufacturers of the personal protective equipment (PPE), safety appliances and medical services is also planned.
Few Presentations are also planned by reputed & leading contractors and exhibitors in Field of Safety & Occupational health displaying their latest advanced products
Sponsors
Diamond
₹5,00,000/-
Features ✔ Presentation (15 minutes) ✔ Stall (2 nos.) ✔ Poster ✔ Advertisement in proceedings Full page(Back cover/2nd/3rd page) ✔ Logo in Banner
Platinum
₹3,00,000/-
Features ✖ Presentation ✔ Stall (2 nos.) ✔ Poster ✔ Advertisement in proceedings Full page ✔ Logo in Banner
Gold
₹2,00,000/-
Features ✖ Presentation ✔ Stall (2 nos.) ✖ Poster ✔ Advertisement in proceedings 1/2 page ✔ Logo in Banner
Silver
₹1,00,000/-
Features ✖ Presentation ✔ Stall (2 nos.) ✖ Poster ✔ Advertisement in proceedings 1/2 page ✖ Logo in Banner
Bronze
₹50,000/-
Features ✖ Presentation ✔ Stall (1 nos.) ✖ Poster ✖ Advertisement in proceedings
✖ Logo in Banner
Exhibit Details
Inclusions:
1. Registration of 2 persons/sponsor
2. 230V/5 amp. Power input will be provided 1 Nos. in each stall.
3. 02 table and 02 chairs will be provided.
Note: LCD/LED display arrangements have to be done of your own.
Call for Papers
Programme Schedule & Presentations
Nominations
Competitions
Committees
Important Dates
Login
☰
